Sales and marketing news, data and thoughts for people who make things.

The Number · Distributor, Rep and Channel

Inventory-to-sales ratios for metals and electrical wholesalers were below 2019 levels in August 2026

We read the Census Bureau's revised monthly wholesale data, January 1992 to August 2026, for six durable goods categories. In August 2026, metals and electrical wholesalers had inventory-to-sales ratios below their 2019 averages (1.60 against 2.30, and 0.98 against 1.17), while wholesalers of hardware, plumbing and heating equipment had a ratio of 2.22, above their 2019 average of 2.06.

A worker in a white hard hat, safety glasses, a high-visibility vest and leather gloves rests both hands on a short stack of round steel bar on a cantilever rack, with several rack arms empty along the aisle.
A worker resting both hands on a short stack of round bar on a partly empty cantilever rack in a steel distribution warehouse.

Merchant wholesalers of durable goods held $1.50 of inventory for every $1 of monthly sales in August 2026, the lowest inventory-to-sales ratio for that group since July 2021 and below its 2019 average of 1.71, according to the Census Bureau’s revised Monthly Wholesale Trade time series, released Oct. 26, 2026. For a manufacturer selling through distributors, the ratio for your distributors’ category is one guide to whether a 2027 channel plan should ask them to stock more or help them sell what they hold.

Metals and minerals wholesalers were at 1.60 against a 2019 average of 2.30, and electrical and electronic goods wholesalers were at 0.98, tied with May and June 2026 for the lowest reading in a series that begins in January 1992. Wholesalers of hardware, plumbing and heating equipment were the only one of the six categories we tracked with a ratio above its 2019 average, at 2.22 against 2.06. Lumber and machinery wholesalers were within 0.07 of their 2019 averages.

Some of the gap below 2019 may come from prices, because Census reports both inventories and sales in current dollars, “not adjusted for price changes,” and its definitions page values inventories “at cost” and says the ratio carries no adjustment “for the markup in sales.” A price increase lifts sales dollars as soon as it reaches invoices, while stock already on hand keeps its old cost.

What is the inventory-to-sales ratio for each kind of distributor?

Census defines the ratio as the dollar value of inventories divided by the dollar value of sales. In this series that means end-of-month stock, valued at cost, over that month’s sales at selling prices, so 1.60 means stock equal to 1.60 times the month’s sales. Census makes no adjustment for the markup, so the ratio comes out lower than months of supply counted in units. Our 2019 averages use the 12 published monthly ratios. The series excludes manufacturers’ sales branches and offices. Census benchmarked the series to the 2024 Annual Integrated Economic Survey and, according to its revision notice, revised seasonally adjusted figures back to January 2015, so any seasonally adjusted ratio for January 2015 onward that Census published before Oct. 26, 2026 may differ from the ones here.

Fig. 01Inventories-to-sales ratio by wholesale category: 2019 average against August 2026
Category (NAICS)2019 averageAug. 2025Aug. 2026Gap to 2019Sales, year over yearInventories, year over year
Metals and minerals (4235)2.302.021.60-0.70+32.5%+4.8%
Miscellaneous durable goods (4239)1.661.311.07-0.59+22.4%-0.2%
Durable goods total (423)1.711.701.50-0.21+22.4%+7.8%
Electrical and electronic goods (4236)1.171.090.98-0.19+36.8%+23.5%
All merchant wholesalers (42)1.351.341.23-0.12+16.3%+7.4%
Lumber and construction materials (4233)1.551.541.48-0.07+7.5%+3.8%
Machinery, equipment and supplies (4238)2.792.982.74-0.05+13.9%+4.9%
Hardware, plumbing and heating (4237)2.062.332.22+0.16+7.8%+2.7%

Ratio is end-of-month inventories at cost divided by monthly sales, both seasonally adjusted and in current dollars, not adjusted for price changes. The 2019 average is the mean of the 12 published monthly ratios. Year-over-year changes compare August 2026 with August 2025. Merchant wholesalers only, excluding manufacturers' sales branches and offices. Source: Our analysis of the Census Bureau's Monthly Wholesale Trade revised adjusted time series (timeseries1.xlsx, Tables 1a to 1c), released Oct. 26, 2026.

Why are metals wholesalers’ ratios so low?

In August 2024, metals and minerals wholesalers (North American Industry Classification System, or NAICS, code 4235) held $2.08 of inventory for every $1 of monthly sales, and by August 2026 they held $1.60. From May to August 2026 their ratio ranged from 1.57 to 1.63, and before 2026 the last month at 1.60 or lower was August 2004. In August 2026 their sales were 32.5 percent above August 2025, while inventories rose 4.8 percent.

The Institute for Supply Management (ISM), in its October 2026 manufacturing report, listed steel as up in price for 12 consecutive months and aluminum for 35, with some respondents also reporting aluminum down. In the same report, primary metals ranked sixth of the 12 industries reporting growth, according to our tally of ISM’s industry ranks. Our reading is that much of the metals sales gain is price. The Census series cannot split price from tonnage, and our piece on durable goods orders explains how to read a dollar-denominated series when prices are rising.

What about electrical, machinery and building products wholesalers?

Sales at electrical and electronic goods wholesalers (NAICS 4236, which also covers household appliances) rose 36.8 percent from August 2025, the fastest of the six categories, while their inventories rose 23.5 percent. Their ratio of 0.98 in May, June and August 2026 is the lowest in the series, against a 2019 average of 1.17. The same ISM report listed copper as up in price for 16 consecutive months and electronic components on its short-supply list for 20 consecutive months, so automation and controls makers selling through electrical distributors should expect questions about both price and allocation.

The highest ratio of the six categories in August 2026 belonged to machinery, equipment and supplies wholesalers (NAICS 4238), at 2.74. That is just under their 2019 average of 2.79 and down from 3.25 in June 2024, the category’s highest since the series began in 1992. Their ratio fell below the 2019 average in May, July and August 2026, and before May 2026 the last month below that level was April 2023.

In building products, the ratio for lumber and other construction materials wholesalers (NAICS 4233) was 1.48 against a 2019 average of 1.55. The hardware, plumbing and heating equipment group (NAICS 4237) was at 2.22 and has been at or above its 2019 average of 2.06 in every month since September 2021.

When do the next wholesale numbers come out?

The advance report for September, released Oct. 28, 2026, put total wholesale inventories at $1,011.5 billion, up 0.6 percent from August and 7.4 percent from September 2025, with no category detail. Census released the Monthly Wholesale Trade report for September at 10 a.m. ET on Nov. 9, 2026, and our read of the September figures updates the ratios in this piece. The October report is due Dec. 9, 2026, according to the Census 2026 indicator calendar. The 2027 calendar lists Jan. 8, 2027 for November data.

What should a 2027 channel plan do with these numbers?

Ask your top five metals and electrical distributors for weeks on hand and fill rate on your top 20 stock-keeping units (SKUs) before asking either group for a stocking order. Ahead of any year-end load-in promotion, fund programs that keep your parts available without asking those distributors to carry more stock: lead times published by product family, consignment for the fastest movers and drop ship for the long tail. In electrical, some of that stock can sit with your rep agency instead: four of the 11 agencies in our review of electrical manufacturers’ representatives say they run their own warehouses.

A first-quarter 2027 stocking program for fast movers is easier to argue with machinery, equipment and supplies distributors than it was a year ago, now that their ratio sits just under its 2019 average. Tie any stocking discount to a monthly sell-through report.

For hardware, plumbing and heating distributors, whose ratio is already above its 2019 average, put 2027 money into sell-through: contractor demand programs, co-op funds paid against proof of local activity and counter training. Our guide to co-op marketing and market development funds (MDF) compares six published programs and how to structure the claims.

Lumber and construction materials plans can wait for the Nov. 9 report, since that ratio is close to its 2019 average.

A January price increase raises your distributors’ sales dollars in every category and, at first, lowers their ratio even if no extra units move, so ask for unit sell-through alongside dollars. If you are writing that January notice, our guide to price increase letters compares 10 real ones.

Our piece on inside and outside sales at distributors covers who handles which accounts at a branch. Ask the branch inside sales reps which of your SKUs they could not quote from stock in the last 90 days.

Sources

  1. US Census Bureau, Monthly Wholesale Trade, revised adjusted time series (Tables 1a sales, 1b inventories, 1c inventories-to-sales ratios), January 1992 to August 2026, released Oct. 26, 2026 (downloaded Nov. 4, 2026)
  2. US Census Bureau, Monthly Wholesale Trade Report, Notice of Revision, Oct. 26, 2026 (read Nov. 4, 2026; Census replaces this page with each release)
  3. US Census Bureau, Monthly Wholesale Trade 2026 Revisions Notice
  4. US Census Bureau, Wholesale Trade definitions (Inventories; Inventories to Sales Ratio; Manufacturers' Sales Branches and Offices)
  5. US Census Bureau, Monthly Advance Economic Indicators Report, September 2026, CB26-177, Oct. 28, 2026 (Census replaces this file with each release)
  6. US Census Bureau, 2026 Economic Indicator Calendar, list view
  7. US Census Bureau, 2027 Economic Indicator Calendar, list view
  8. ISM, Manufacturing PMI at 55.5%; October 2026 ISM Manufacturing PMI Report, PR Newswire, Nov. 2, 2026
  9. Plant to Pipeline, durable goods orders, price vs. volume
  10. Plant to Pipeline, ISM manufacturing index by industry, October 2026
  11. Plant to Pipeline, co-op marketing and MDF for manufacturers
  12. Plant to Pipeline, price increase letters for manufacturers
  13. Plant to Pipeline, inside vs. outside sales at distributors

See an error? Email editor@planttopipeline.com with what is wrong. We fix errors and log them on the corrections page.

Filed under

Filed under

The Tuesday issue

One idea, one number and one example from a company like yours. Every Tuesday, under five minutes.

We use your email to send our newsletter and marketing emails. Unsubscribe anytime. Read our privacy policy.