Sales and marketing news, data and thoughts for people who make things.

Industry edition · Distributor, Rep and Channel

How a smaller maker gets on an electrical rep's line card

We read NEMRA's terms for manufacturers and the websites of 11 electrical rep agencies on Nov. 5, 2026. Eight posted line cards we could count, with 11 to 50 manufacturers each, and four said they run their own warehouses.

A large reel of black cable on a steel stand pays cable down onto a worn steel table holding tape, short cable offcuts and a cable cutter, with racks of black, red and white wire reels, steel conduit and cartons behind.
A stocking electrical rep agency's stock room, with a cable reel on its stand and a cutting table in front of racked reels and conduit.

If your electrical line has gaps in its coverage, the agency that could fill one has probably published most of what you need to judge it. Electrical manufacturers’ representatives are independent firms that sell several makers’ products to distributors, contractors and engineers inside a set territory, and most of the agencies we checked post their line cards, territories and services on their own sites. Read those pages before you pay for a listing with NEMRA, the reps’ trade association, whose RepConnect posting costs a non-member manufacturer $995 and is seen only by NEMRA rep members.

Of the 11 agency sites, eight had a line card we could count, running from 11 to 50 manufacturers. Four said they hold stock in their own warehouses, six named specification support, and five had a page written for manufacturers seeking a rep. A smaller maker should shortlist agencies whose cards carry lines that complement its own and none that compete with it, then arrive with stock terms, a commission split policy and a training plan for the agency’s inside sales staff. RepConnect and NEMRA’s Jan. 31 to Feb. 3, 2027 conference in Dallas come after that shortlist.

What electrical manufacturers representatives publish about themselves

Nine of the 11 agencies are named on NEMRA’s board and committee page; we added Yanow and Osterman Fox. We recorded each site’s territory, line count, warehouse, specification support and any page addressed to manufacturers. Ten are US agencies; Adanac Sales covers British Columbia.

Fig. 01What 11 electrical rep agency websites show a manufacturer
TerritoryLines on the cardOwn warehouse statedSpecification support namedPage for manufacturers
Casey Electric SalesIL, NW IN, WI, IA, NE, MO, KS, UP of MI50YesYesYes
Adanac Sales (Canada)British Columbia39NoYesYes
DZ CookNorthern CA, Northern NV37NoNoYes
Ewing-FoleyWestern US, Mountain, Southwest, TX and Gulf36NoYesYes
YanowNew England, Upstate NY34NoYesNo
Osterman FoxUpstate NY18YesNoNo
McAuliffe SalesMI, OH, IN, KY, W PA, WV13 (Michigan)NoYesNo
DeFazioVA, NC, SC, MD, DC11 shown; About page says 21NoYesYes
Electra Sales (Texas)TX, OK, AR, TN, NW LA, N MSDid not loadYesNoNo
Agents WestCA, NV, AZ, NM, El PasoUnder revisionYesNoNo
ELA + SynergyNYC, Long Island, N NJ, E PA, DEDid not loadNoNoNo

Read Nov. 5, 2026. Lines are logos or named entries on the agency's line card page; brands of one parent listed separately are counted separately, except Osterman Fox's Legrand group, counted once. Yes means the agency's own site says so. McAuliffe shows 13 lines for Michigan, its largest territory list. Source: Our analysis of agency websites; nine of the 11 agencies are named on NEMRA's board and committee page.

Three line cards could not be counted. The PDF from Agents West, dated October 2026, now reads “ELECTRICAL LINE CARD UNDER REVISION.” The territory line cards at Electra Sales in Texas and at Electric Lighting Agencies, a New York lighting agency that merged with a regional electrical agency in 2024 according to tEDmag, are built in script that did not load in our reads.

How long is a line card, and where would yours fit

Casey Electric Sales lists 50 manufacturers on its line card page. DZ Cook lists 37 on its manufacturers page, 22 electrical and 15 lighting, and Ewing-Foley lists 36 on its own. At the short end, McAuliffe Sales says it is “Focused on a small list of Manufacturer Clients” and shows 13 for Michigan on its clients page. DeFazio shows 11, though its About page says “21 Brands.” Ewing-Foley writes on its Why EFI page that “A limited line card allows the focus to execute on all levels.”

nVent brands sit on six of the eight cards we counted, and Hammond Power Solutions dry-type transformers are on Casey’s, McAuliffe’s and Osterman Fox’s. Overlap like that is what to check for conflicts, because NEMRA describes its rep members on its membership page as “managing portfolios of complementary, noncompetitive products within defined territories.” An agency already carrying your direct competitor is a poor first call, so search each card for that name, then for the lines your product goes in beside on the same job. A fittings maker wants the agency that already sells the conduit and strut.

Building products companies that sell fixtures often go through lighting agencies, and the same checks apply. Inside Lighting, a trade site, reported 105 new agent and brand partnerships in its Aug. 26, 2026 roundup.

Which agencies stock product, and what that asks of you

Four of the 11 say they hold inventory. Casey and Agents West give square footage: “an 80,000 sq ft warehouse with cutting and paralleling machines” on Casey’s home page, and “55,000 square feet of warehouse space” in La Mirada, California, on Agents West’s manufacturers page. In Syracuse, Osterman Fox runs warehouse facilities and calls itself “a full-service stocking electrical manufacturer’s representative agency” on its Upstate New York page. Electra Sales gives its Irving, Texas warehouse a page of its own, and a Nov. 3, 2026 post on PECO fittings says orders in “by one o’clock” go out the same day.

Stock is a set of terms to agree before signing: who owns the inventory, who pays freight to the rep’s warehouse, and what happens to unsold stock when the agreement ends. NEMRA’s sample sales representative agreement, updated October 2023, puts the risk of loss on the manufacturer when the rep holds product at the manufacturer’s request, and NEMRA’s resource library lists a Rep Warehousing Playbook. The sample tells both sides to consult an attorney, and nothing here is legal advice.

Specification support, and how commissions split

Six agencies name specification work. Casey and Yanow list engineering staff: Casey’s support team includes a Specification Engineer and a Lighting Director, and Yanow’s Why Yanow page lists “On-Staff Engineers & Professionals” and lighting audits. Adanac and McAuliffe describe spec work with engineers, Adanac as “Specification Engagement with Engineers” on its representation page and McAuliffe through a Detroit team that “helps develop program specifications at the design level.” For data centers, Ewing-Foley’s data center page says it carries 13 manufacturers across a data center’s power path, and DZ Cook’s names hyperscale and colocation work. Our piece on selling into data center construction covers who places those orders.

When engineering, the order and shipment fall in different territories, NEMRA’s sample agreement splits the commission 50% to the rep where the product is engineered or specified, 25% where it ships and 25% where the order is executed, so spec work changes which rep gets paid and how much. On rates, NEMRA’s whitepaper on using an independent rep, an advocacy paper that argues for reps over a direct sales force, gives “5-10% of sales” as the typical commission rate for independent reps in the electrical industry. An agency that tracks specified jobs, as DeFazio’s About page says it does, will expect a split policy from you.

Using NEMRA’s RepConnect once you have a shortlist

NEMRA’s RepConnect page prices a posting for manufacturers seeking reps at $395 for members of the NEMRA Manufacturers Group (NMG) and $995 for non-members, and $295 or $495 to run it another 90 days in the same calendar year. A non-member can post only if it meets every NMG requirement except the reps under contract, and the opportunity has to be in electrical or lighting. NEMRA reviews a submission within three business days, emails the posting to its rep members and keeps it for 90 days on a postings page that only rep members can open, with performance numbers every 30 days and changes to territories and commission rate allowed while it runs.

NEMRA’s membership page counts 391 rep members. Full NMG membership, according to NEMRA’s NMG qualifications, requires recommendations from two rep members, an independent sales force “responsible for at least 25%” of annual sales, and “at least five Representative Members under contract for a minimum of one year.” Associate membership takes three to five rep firms under contract for a year, and the dues table starts at $2,750 a year for under $50 million in US sales. The document points makers who do not qualify to RepConnect, and first-time NMG members get one free. NEMRA’s 2024 Manufacturer of the Future study, built on interviews with “over 30 manufacturers,” is “free to all NEMRA members” and $199 for non-members, according to its report page.

NEMRA27 in Dallas

NEMRA opened registration on Sept. 15, 2026 for NEMRA27, which runs Jan. 31 to Feb. 3, 2027 in Dallas, and its release lists one-on-one business meetings and manufacturer group meetings. The other 2027 shows, including IPC APEX EXPO in April, are on our 2027 trade show calendar.

What to bring an agency

Adanac posts its own activity on its home page: “5,000+” quotes sent a year, “400+” product trainings delivered and “100+” distribution branches supported. Those are the kinds of numbers to ask a US agency to report each quarter. NEMRA’s sample agreement has the manufacturer supply samples and literature at no cost to the rep and send a point-of-sale report with each commission statement. Its territories guideline says “the territory is what the representative and manufacturer agree it is” and recommends county lines. Our pieces on inside and outside sales at distributors and on co-op and market development funds cover the distributor side of the same deal.

Fig. 02The rep onboarding kit to have ready before the first agency call
  • Line card one-pager: what you make, who installs it and which lines it is sold beside
  • Price book and commission terms, including your split policy for specified jobs
  • Territory map drawn on county lines, with any house accounts named
  • Training plan for the agency's inside sales team, with dates for the first 90 days
  • Literature, spec sheets and samples, supplied at no cost to the agency
  • Stock or consigned inventory terms: who owns it, freight, risk of loss and buy-back at termination
  • Quarterly reporting: quotes, trainings, branches visited, and the point-of-sale data you will send back

Built from what the agencies list as their services and from the terms in NEMRA's sample agreement and territories guideline. Source: Our analysis of 11 agency websites and NEMRA's sample sales representative agreement (October 2023) and Marketing Territories Guideline.

What to do before NEMRA27

List the territories where you have no rep or a weak one. For each, open the line cards of three to five agencies, starting with the firms on NEMRA’s board page, and search them for your competitors and for the lines your product sells beside. Email the agencies that pass, naming the complementary lines on their card, and ask for their warehouse terms and the reports they send manufacturers. Have the onboarding kit written before those calls. If a territory still has no candidate by early December 2026, and you meet NMG’s requirements apart from the reps under contract, post a RepConnect for it. At $995 for a non-member, it runs 90 days, through the conference dates. Then request one-on-one meetings in Dallas with the agencies on your shortlist.

Sources

  1. NEMRA: About RepConnect Service
  2. NEMRA: Current RepConnect Postings (rep members only)
  3. NEMRA: Why Join NEMRA
  4. NEMRA: Qualifications for NMG Membership and dues (PDF)
  5. NEMRA: Executive Committees
  6. NEMRA: Guidelines and Whitepapers library
  7. NEMRA: Manufacturer of the Future Report
  8. NEMRA: Register Now: NEMRA27 Annual Conference (Sept. 15, 2026)
  9. NEMRA Insights: Guidelines for Negotiating Agreements, updated October 2023 (PDF)
  10. NEMRA: The Value of Using an Independent Sales Rep Over Direct Sales, updated 2024 (PDF)
  11. NEMRA: Marketing Territories Guideline (PDF)
  12. Casey Electric Sales: Manufacturers
  13. Casey Electric Sales: home page
  14. Adanac Sales: Line Card
  15. Adanac Sales: Representation
  16. Adanac Sales: home page
  17. DZ Cook: Manufacturers
  18. DZ Cook: Data Centers
  19. DZ Cook: About Us
  20. Ewing-Foley: Manufacturers
  21. Ewing-Foley: Why EFI?
  22. Ewing-Foley: Why Use a Manufacturers Rep?
  23. Ewing-Foley: Data Center Power Path
  24. Yanow: Our Product Portfolio
  25. Yanow: Why Yanow?
  26. Osterman Fox: Upstate New York
  27. Osterman Fox: Upstate NY Line Card
  28. McAuliffe Sales: home page
  29. McAuliffe Sales: Our Clients
  30. McAuliffe Sales: All Territories line card (PDF)
  31. DeFazio: Manufacturers
  32. DeFazio: About
  33. Electra Sales: home page
  34. Electra Sales: PECO Fittings on the Shelf in Irving (Nov. 3, 2026)
  35. Electra Sales: North Texas Warehouse
  36. Electra Sales: Our Team
  37. Agents West: Manufacturers
  38. Agents West: Line Cards
  39. Agents West: Linecards PDF, Rev 10.2026
  40. Electric Lighting Agencies: home page
  41. tEDmag: Synergy Merges With Electric Lighting Agencies (March 4, 2024)
  42. Inside Lighting: Lighting Agents & Brands Unite in 105 New Partnerships (Aug. 26, 2026)

See an error? Email editor@planttopipeline.com with what is wrong. We fix errors and log them on the corrections page.

Filed under

Filed under

The Tuesday issue

One idea, one number and one example from a company like yours. Every Tuesday, under five minutes.

We use your email to send our newsletter and marketing emails. Unsubscribe anytime. Read our privacy policy.