The Number · Distributor, Rep and Channel
Metals distributors' stock-to-sales ratio hit a record low in September 2026
Metals distributors hold less stock per sales dollar than in any month on record, and machinery fell further below its 2019 level. Set your distributors' January stocking requests by line.

Metals and minerals wholesalers held $1.46 of inventory for every $1 of monthly sales in September 2026, according to the Census Bureau’s Monthly Wholesale Trade report for September 2026, released Nov. 9, 2026. That is the lowest ratio in the Census seasonally adjusted time series, which begins in January 1992, and compares with a 2019 average of 2.30. Across all merchant wholesalers, wholesale inventories rose 0.7 percent from August to $1,013.1 billion and sales rose 2.8 percent, which brought the group’s ratio down to 1.21 against a 2019 average of 1.35.
For a manufacturer selling through distributors, most of the channel is still lean going into 2027 orders. In metals, electrical and machinery, a January plan built on availability, with any stocking tied to sell-through, will sell more easily than a load-in promotion. Of the six durable goods lines we track, hardware, plumbing and heating is the only one where distributors hold more stock per sales dollar than in 2019 (Fig. 01).
Wholesale inventories by product line, against 2019
Five of the six durable goods lines we track sat below their 2019 averages, as in our August read of the inventory-to-sales ratio by distributor type. September figures are seasonally adjusted, from Table 1 of the Census release workbook, and the 2019 averages, series lows and streaks come from the Census adjusted time series.
Metals fell from a revised 1.57 in August to 1.46 because sales rose 6.7 percent in the month while inventories slipped 0.9 percent. Sales were 37.5 percent above September 2025 in current dollars, not tons, and we read most of that gain as price, because the Bureau of Labor Statistics producer price indexes for iron and steel and nonferrous metals rose 20.7 and 33.6 percent over the same 12 months (preliminary, not seasonally adjusted).
Electrical and electronic goods wholesalers, which include the electrical distributors many automation and controls makers sell through, stayed at 0.98, tying May, June and August 2026 for the series low. Their sales were 42.9 percent above September 2025 in current dollars and their inventories 23.8 percent higher, while the producer price index for electrical machinery and equipment rose 13.3 percent, so price explains less of this line’s gain than of metals’.
Machinery, equipment and supplies wholesalers dropped to 2.65, their lowest since March 2023 and their third month in a row below the 2019 average of 2.79. Because neither the 2.7 percent monthly sales gain nor the 0.2 percent dip in inventories is significant at Census’s 90 percent confidence level (Table 2 of the release workbook), we put more weight on the three months below the 2019 average than on the September change.
Hardware, plumbing and heating wholesalers rose to 2.26 against a 2019 average of 2.06 and have been at or above that average in every month since September 2021.
| Line (NAICS) | 2019 average | Aug. 2026 (revised) | Sept. 2026 | Gap to 2019 |
|---|---|---|---|---|
| Metals and minerals (4235) | 2.30 | 1.57 | 1.46 | -0.83 |
| Miscellaneous durable goods (4239) | 1.66 | 1.09 | 1.10 | -0.57 |
| Durable goods total (423) | 1.71 | 1.50 | 1.49 | -0.22 |
| Household appliances, electrical and electronic goods (4236) | 1.17 | 0.98 | 0.98 | -0.19 |
| Machinery, equipment and supplies (4238) | 2.79 | 2.72 | 2.65 | -0.15 |
| All merchant wholesalers (42) | 1.35 | 1.23 | 1.21 | -0.14 |
| Lumber and construction materials (4233) | 1.55 | 1.49 | 1.50 | -0.06 |
| Hardware, plumbing and heating (4237) | 2.06 | 2.22 | 2.26 | +0.20 |
End-of-month inventories at cost divided by monthly sales, both seasonally adjusted and in current dollars, not adjusted for price changes. The 2019 average is the mean of the 12 published monthly ratios. September 2026 is preliminary. Merchant wholesalers only, excluding manufacturers' sales branches and offices. Gap to 2019 is computed before rounding (September 2026 inventories divided by sales, minus the 2019 average), so it can differ by 0.01 from the difference between the two printed ratios. Source: Our analysis of the Census Bureau's Monthly Wholesale Trade report for September 2026 (currentwhl.xlsx, Table 1) and adjusted time series (timeseries1.xlsx, Tables 1a to 1c), released Nov. 9, 2026.
What changed since the August numbers
Census revised August in the September report: metals’ August ratio is now 1.57, against the 1.60 we reported on Nov. 4, and machinery’s is 2.72, against 2.74. The advance estimate of Oct. 28 put September wholesale inventories at $1,011.5 billion, up 0.6 percent, and the full report raised that to $1,013.1 billion, up 0.7 percent.
The notes to Census’s adjusted time series tables say its dollar estimates of sales and inventories are “not adjusted for price changes.” Its definitions page values inventories “at cost” and makes no adjustment in the ratio “for the markup in sales,” so a price increase lowers a line’s ratio as soon as it reaches invoices (our piece on durable goods orders explains how to read dollar series).
What to ask distributors for in January
For metals and electrical distributors, ask your top five for weeks on hand and fill rate on your top 20 stock-keeping units before asking for a stocking order, because higher prices account for part of their low ratios and a distributor that stocks up now carries the price risk on inventory bought at today’s costs. Offer programs that keep parts available without more stock on their shelves: lead times published by product family, consignment for fast movers and drop ship for the long tail.
With machinery distributors now 0.15 below their 2019 average, wider than the 0.07 gap in the revised August figures (Fig. 01), a first-quarter 2027 stocking program for fast movers is easier to argue. Tie any stocking discount to a monthly sell-through report.
Hardware, plumbing and heating distributors already carry more than in 2019, so put 2027 money into sell-through: contractor programs, counter training and co-op funds paid against proof of local activity (see our guide to co-op marketing and market development funds).
Lumber and construction materials distributors sit 0.06 below their 2019 average (Fig. 01), close enough that standard stocking terms should hold until October data arrives on Dec. 9, 2026, per the Census 2026 indicator calendar.
If you raise prices in January, ask distributors for unit sell-through alongside dollars, because the ratio will fall on price alone, and send a written notice (our guide to price increase letters compares real ones).
How we did this
We took seasonally adjusted September 2026 figures from Table 1 of the Census release and checked each against the adjusted time series for January 1992 to September 2026, both posted Nov. 9, 2026. Each 2019 average is the mean of that year’s 12 published monthly ratios, and we recomputed every percent change from dollar levels. Significance tests apply Census’s 1.753 multiplier to the Table 2 standard errors. September figures are preliminary and will be revised in the December report.
Sources
- US Census Bureau, Monthly Wholesale Trade: Sales and Inventories, September 2026 (CB26-168), release PDF, Nov. 9, 2026
- US Census Bureau, Monthly Wholesale Trade, September 2026 release workbook (Tables 1 and 2)
- US Census Bureau, Monthly Wholesale Trade, current release page
- US Census Bureau, Monthly Wholesale Trade adjusted time series (Tables 1a sales, 1b inventories, 1c inventories-to-sales ratios), January 1992 to September 2026
- US Census Bureau, Advance Economic Indicators Report, September 2026 (CB26-177), Oct. 28, 2026
- US Census Bureau, Wholesale Trade definitions
- US Census Bureau, 2026 Economic Indicator Calendar
- US Bureau of Labor Statistics, Producer Price Index by Commodity, Iron and steel (WPU101)
- US Bureau of Labor Statistics, Producer Price Index by Commodity, Nonferrous metals (WPU102)
- US Bureau of Labor Statistics, Producer Price Index by Commodity, Electrical machinery and equipment (WPU117)
- Plant to Pipeline, inventory-to-sales ratios by distributor type, August 2026
- Plant to Pipeline, durable goods orders, price vs volume
- Plant to Pipeline, co-op marketing and market development funds
- Plant to Pipeline, price increase letters
See an error? Email editor@planttopipeline.com with what is wrong. We fix errors and log them on the corrections page.
Filed under
Filed under


