Sales and marketing news, data and thoughts for people who make things.

Industry edition · Brand and PR

Wire harness manufacturer claims: what "IPC-620 certified" and "UL" mean, and what a buyer can check

We read IPC's public list of IPC/WHMA-A-620 qualified manufacturers and the websites of 12 US wire harness and cable assembly makers on Nov. 5, 2026. Two of the 12 were on IPC's list, two published a UL file number, and two stated on their pages the A-620 class they build to.

Close-up of red, black, white and green wires twisted into a bundle on a plywood harness board, held between steel pegs by two nylon cable ties and running into a black braided sleeve under a heat-shrink cuff.
A wire harness trunk tied down on a harness formboard and finished into a braided sleeve.

Eight of the 12 wire harness manufacturer websites we read mention IPC/WHMA-A-620, the workmanship standard for cable and harness assemblies, and eight mention UL. IPC certifies people, and it qualifies a small number of company sites through an audit. A company page in IPC’s certification statistics carries this note: “IPC does not certify companies; this site shows the number of people by company for each type of individual certification.” The company-level qualification is the Qualified Manufacturers List (QML), and on Nov. 5, 2026, IPC’s IPC/WHMA-A-620 QML page listed 11 sites worldwide, four of them in the US.

So a harness shop’s claim to be IPC-620 certified usually means some of its operators, inspectors or trainers hold IPC certificates, which a buyer can partly check. We recommend saying exactly which proof you hold (people certified, class built to, QML or not, UL file number and category) and where a buyer can verify it. Among the 12 sites, Electro-Prep publishes two UL file numbers with their categories, and Manufactured Assemblies Corp. states its QML class. Put the same proof on your capabilities page, and use our guide to a capabilities statement for the rest of what that page should state.

What did 12 harness and cable assembly makers’ sites say on Nov. 5, 2026?

We read nine makers from a first list and three found through searches for “wire harness manufacturer” and “cable assembly manufacturer”: Minnesota Wire, CableConn Industries and Heale Manufacturing. Five other sites, including Pinner Wire & Cable and Douglas Electrical Components, refused our requests or did not load. Twelve sites picked this way are a small set and not a random sample, so the counts describe these pages and not the industry.

Counting each site once, the IPC-620 wording fell into five kinds: one QML claim, three descriptions of certified people, two statements of conformance, two certifications named without detail, and four sites with no IPC-620 wording we could find. Manufactured Assemblies Corp. (MAC) in Vandalia, Ohio, claims “IPC/WHMA-A-620 QML Class 3,” is on IPC’s list and also mentions “On-site IPC trainers.” Electro-Prep, ICTC and Nortech Systems describe certified people. Electro-Prep lists “an IPC/WHMA-A-620 Certified Trainer on staff,” ICTC lists “in house Certified IPC Trainers” and certified technicians for the standard and its space addendum, and Nortech Systems names an “In-house IPC certified Master Trainer.” E-Tron Systems and Elektro Assemblies are the two that state conformance, E-Tron with “Workmanship Conforms to IPC/ WHMA/ A-620 Standards” and Elektro with “meets the WHMA standard.” MarVac Assemblies and Minnesota Wire name a certification with no detail in the page text, “WHMA/IPC A620 Certification” and “IPC 620 Harness Certified.”

MarVac is on IPC’s QML at Classes 1 and 2, and IPC announced its listing on May 28, 2019 after an initial audit that May. Its page text says “WHMA/IPC A620 Certification”; the letters QML appear in the file behind its “WHMA/IPC A620” link, MarVac’s IPC certificate, which says the site “is qualified for the QML through July 18, 2028.” A buyer who reads the page without opening that file sees the same kind of wording Minnesota Wire uses. Only two of the 12 state on their pages the class they build to: MAC (Class 3) and Nortech (“Class 2 or 3”).

Eight of the 12 mention UL, and two publish a file number. Electro-Prep lists “Processed Wire” (E69579) and “Wiring Harnesses” (E119106). MCX in Klamath Falls, Oregon says “We are certified for wiring harnesses in both the United States and Canada” and links two printouts from UL’s directory showing file E84072 under “Wiring Harnesses - Component.” The other six say “UL Registered” (MAC), “UL Recognized” (MarVac), “UL Listed Facility” (DSM&T), “can be labelled as UL certified” (Elektro), UL among benchmarks it is “certified and compliant with” (ICTC’s homepage), or “UL, CSA, TUV, NSF, CE and other regulatory agency support” (Nortech’s quality page).

Fig. 01How 12 US harness and cable assembly makers word IPC-620 and UL
MakerIPC-620 wordingOn IPC's A-620 QMLUL wordingUL file number published
Manufactured Assemblies Corp. (MAC), OHQML claim, Class 3YesUL Registered; UL508ANo
MarVac Assemblies, WICertification named, no detail (link opens its QML certificate)YesUL RecognizedNo
Electro-Prep, MACertified trainer and personnelNoUL Listed, two categories namedYes (E69579, E119106)
ICTC, FLCertified trainers and techniciansNoUL among benchmarksNo
Nortech Systems, MNCertified master trainer; Class 2 or 3NoRegulatory agency supportNo
E-Tron Systems, VAConformanceNoNone foundNo
Elektro Assemblies, MNConformance (WHMA standard)NoCan be labelled as UL certifiedNo
Minnesota Wire, WICertification named, no detailNoNone foundNo
MCX, ORNone foundNoCertified for wiring harnesses, US and CanadaYes (E84072, via linked UL printouts)
DSM&T, CANone foundNoUL Listed FacilityNo
CableConn Industries, CANone foundNoNone foundNo
Heale Manufacturing, WINone foundNoNone foundNo

Fig. 01. Two of 12 makers are on IPC's IPC/WHMA-A-620 Qualified Manufacturers List, two state on their pages the class they build to, and two publish a UL file number. Wording as each site shows it; pages read Nov. 5, 2026. Source: Our analysis of 12 makers' websites and IPC's IPC/WHMA-A-620 QML page, read Nov. 5, 2026 (E4-recheck.csv)

What is the difference between IPC operator certification and the QML?

The three person-level programs on IPC’s A-620 endorsement page are Certified IPC Specialist (CIS), Certified IPC Trainer (CIT and MIT) and Certified Standards Expert (CSE). It says “More than 20,000 A-620 Application Specialists have been trained.” A trainer on staff means the shop can train its own operators for CIS certification, which is what Electro-Prep, ICTC, Nortech and MAC describe.

The QML is an audit of a site’s assembly process. IPC’s Validation Services FAQ describes about a month of paperwork and a self-audit checklist, then an on-site audit that “can take two to three days.” It says “Qualifications are published on the public IPC website” and that a qualification “is valid for three years,” so a buyer can ask a QML shop for its current certificate. Each entry names the classes qualified. The four US sites are Lockheed Martin Rotary and Mission Systems in Liverpool, New York; MAC; MarVac; and Teledyne Cable Solutions in Dallas, whose Class 3 QML IPC announced in May 2023.

Which UL claims can a buyer check, and what does UL listing mean for a harness?

A UL file number with its category is the claim a buyer can look up. MCX’s printouts show the category “Wiring Harnesses - Component,” the file number and UL’s own warning that a company’s name in the directory “does not in itself assure that products so identified have been manufactured under UL’s Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL’s Follow-Up Service.” So ask whether the harness the shop ships will carry the mark under that file.

UL’s guide for code authorities compares UL Listing and Component Recognition to “a car and an engine”: Recognized Components are “evaluated by UL for factory installation within equipment,” while Listed products are usually complete equipment for field installation. A harness that goes inside an OEM’s machine or panel is usually a component, so “UL Listed” on a harness shop’s site calls for a question about the category. “UL Registered” and “UL Recognized” with no file number give the buyer no file to look up. UL’s Product iQ database blocked our script on Nov. 5, 2026, so we did not check any file number there.

How should a wire harness manufacturer word its proof?

Put each claim in a form a buyer can check, on one certifications page that every quote and capabilities sheet links to.

Fig. 02Claims a harness buyer can check, and how to word them
ClaimWording that holds upWhere the buyer checks it
People certified to A-620Number of CIS-certified operators and inspectors, and CITs on staff, by siteIPC certification statistics by company (self-reported, updated periodically); certificates on request
Class built toClass 2 or Class 3, and which programs or customers get whichThe drawing or PO flowdown; first article report
IPC/WHMA-A-620 QMLQML, the classes listed and the site address, with links to IPC's QML page and the current certificateIPC's IPC/WHMA-A-620 QML page
ULFile number and category name (for example, Wiring Harnesses - Component), and whether shipped harnesses carry the markUL's Product iQ directory, or the shop's directory printout

Fig. 02. Our recommended wording, based on what IPC and UL publish about each program, read Nov. 5, 2026. Source: Plant to Pipeline recommendation; IPC certification statistics, A-620 endorsement, Validation Services FAQ and QML pages; UL code authority guide.

IPC’s certification search lets anyone look up a company’s certified headcount by program, with the note that the figures are “self-reported candidate data” and “updated periodically.” Check your shop’s entry, and if it is thin or missing, fix it before your site claims IPC-620 certification.

In your industry: buying harnesses for industrial machinery

For a machinery or equipment OEM, the harness is a component inside a product that may carry its own UL listing, and UL’s guide says its “Listing evaluation of an end product includes an investigation of the construction and performance of all installed components.” Ask for the file number and category at quote, put the A-620 class on the drawing, and request the certified headcount for the site that will build your part.

What to do Monday

  1. Rewrite your certifications page so each line says who or what holds the proof, at what class, with a file number or link. Replace “UL certified” with the file number and category.
  2. Check your company’s entry in IPC’s certification search and match the headcount your site claims.
  3. If you are on the QML, say so in the page text with the classes, and link to IPC’s QML page as well as your certificate.
  4. Use the same wording, number for number, on directory and marketplace profiles; our piece on Thomasnet and the RFQ marketplaces covers which are worth keeping.
  5. Write each certification line as page text. In our test of which data sheets get cited in AI answers, the pages that got cited stated the number in plain, readable text.
  6. Add a line to every quote: the A-620 class you will build to and the UL file the harness ships under, if any.

Sources

  1. IPC (Global Electronics Association), Validation Services Qualified Manufacturers Listing (QML), IPC/WHMA-A-620
  2. IPC, Validation Services frequently asked questions
  3. IPC, IPC/WHMA-A-620 Endorsement Program
  4. IPC, Certification statistics search
  5. IPC, Certification statistics for Axiom Electronics
  6. MarVac Assemblies, IPC/WHMA-A-620 QML certificate, qualified through July 18, 2028 (PDF)
  7. IPC news release, MarVac Assemblies earns IPC Qualified Manufacturers Listing (QML), May 28, 2019
  8. IPC news release, Teledyne Cable Solutions awarded IPC/WHMA-A-620 Qualified Manufacturers Listing, May 2, 2023
  9. UL, UL Recognized Component Marks: What code authorities need to know (PDF)
  10. Manufactured Assemblies Corp., homepage
  11. Manufactured Assemblies Corp., About
  12. Manufactured Assemblies Corp., Capabilities
  13. Electro-Prep, homepage
  14. Electro-Prep, Certifications
  15. Electro-Prep, Quality
  16. Electro-Prep, About us
  17. ICTC, homepage
  18. ICTC, Cable and wire harnesses
  19. ICTC, Quality assurance
  20. ICTC, About us
  21. Nortech Systems, homepage
  22. Nortech Systems, Quality and regulatory compliance
  23. Nortech Systems, Aerospace and defense quality, compliance and test capabilities
  24. E-Tron Systems, homepage
  25. E-Tron Systems, About
  26. Elektro Assemblies, homepage
  27. Elektro Assemblies, Certifications
  28. Elektro Assemblies, Capabilities
  29. DSM&T, homepage
  30. DSM&T, Wire harnesses and cable assemblies
  31. DSM&T, Compliances
  32. MarVac Assemblies, homepage
  33. MarVac Assemblies, Quality certifications
  34. MarVac Assemblies, Custom wire harness and cable assembly
  35. MCX, homepage
  36. MCX, Certifications
  37. MCX, UL directory printout, Wiring Harnesses - Component, ZPFW2.E84072 (PDF)
  38. MCX, UL directory printout, ZPFW8.E84072 (PDF)
  39. Minnesota Wire, homepage
  40. Minnesota Wire, Certifications
  41. Minnesota Wire, About us
  42. CableConn Industries, homepage
  43. CableConn Industries, Quality
  44. CableConn Industries, Custom cable assembly and harness
  45. Heale Manufacturing, homepage
  46. Heale Manufacturing, About

See an error? Email editor@planttopipeline.com with what is wrong. We fix errors and log them on the corrections page.

Filed under

Filed under

The Tuesday issue

One idea, one number and one example from a company like yours. Every Tuesday, under five minutes.

We use your email to send our newsletter and marketing emails. Unsubscribe anytime. Read our privacy policy.