Sales and marketing news, data and thoughts for people who make things.

Industry edition · CRM and RevOps

Injection molders should track the mold and production as two CRM deals

We read nine US injection molders' published process pages on Nov. 4, 2026, and eight of the nine list a sample or approval step, such as first trial (T1) samples or a first article inspection, between mold build and production. We recommend CRM pipeline stages that follow the same sequence of mold build, sample approval and production, with the mold and the production program tracked as two linked deals.

A man in safety glasses holds a milky-white plastic sample part above the cavity half of an open injection mold lying on a steel workbench.
A toolmaker at a tool room bench holding a first trial sample part above the open mold it came from.

When a custom molder marks a program “won” on the tooling purchase order (PO), the production revenue has no stage or close date of its own in the molder’s customer relationship management system (CRM). A CRM fits the work better when it tracks two linked deals: a tooling deal that closes on the tooling PO, and a production deal whose CRM pipeline stages run through tool design approval, tool build, T1 samples and customer approval before it closes on the first production order. T1 is the first set of trial shots from a new mold. Wunder-Mold’s timeline guide describes it as the point where “the completed mold runs its first shots.”

That model is our recommendation, and its stage order follows the way molders describe their own work on the nine US process pages we read on Nov. 4, 2026. The full stage list, exit criteria and linking fields we recommend are at the end of this piece.

What do molders’ own process pages put between the mold and production?

The nine pages, each with a US address, name between three and 10 steps each, and Fig. 02 sets them side by side. We dropped a tenth page from our researcher’s list, RJC Mold’s guide, because its footer lists a factory in Shenzhen, China, and the page describes “the export mold process.”

Eight of the nine list a sample, first article or approval step between tool build and production in their process steps, and seven give it its own numbered step or heading. Extreme Molding, Meridian Products and Hansen Plastics’ lead-time post each give approval a step or section of its own; at Meridian it is a Review step in which “First samples are produced and submitted for customer review and approval.” Plastimold Products splits the approval step in two, with T1 samples checked against the print in step 4 and first article inspection and mold qualification in step 5. Tool validation and then part validation sit inside Midstate Mold & Engineering’s “PHASE FOUR: Tool Design and Build,” where the step is named but has no phase of its own. Pioneer Plastics mentions first article approval only in an FAQ answer, outside its three steps.

Two pages give the purchase order a stage of its own, at different points in the program. Midstate’s stage, “PHASE THREE: Receipt of Purchase Order / Review,” sits ahead of tool design and build, and its production phase later begins “to fulfill the purchase order,” which suggests one PO covers the tool and the parts. At Precision Molded Plastics, Order Processing begins “When a purchase order is received” once the mold is approved and placed into production, so its PO is a production order. AIM Processing ties a PO to the tool by name: “Next, PO is issued for the tooling.” Plastimold measures its tool time from PO to T1 without saying whether that PO covers the tool alone or the tool and the parts. When one PO covers both, as Midstate’s page suggests, close the tooling deal on that PO and close the production deal on the first release against it.

Extreme Molding’s terms tie the tooling invoice to production approval, asking “that mold costs are paid 50 percent up front, with the balance due after first article’s approval.” A molder with terms like that needs the tooling deal to read the approval date from the production deal, as step 4 of the setup list below describes.

Fig. 01Track the tool and the production program as two linked deals
  1. 1

    Tooling deal, stage 1: RFQ in review

    Exit: the request for quote (RFQ) is logged with its 3D file, drawing, EAU, resin and tooling need.

  2. 2

    Tooling deal, stage 2: Quote sent

    Exit: itemized quote with tool price and piece price attached.

  3. 3

    Tooling deal, stage 3: Tooling PO received (closed won)

    Exit: PO entered and reviewed against the quote. Creates the linked production deal (program ID, part number, EAU, piece price).

  4. 4

    Production deal, stage 1: Tool design approval

    Exit: customer signs off on DFM changes and tool design.

  5. 5

    Production deal, stage 2: Tool build

    Exit: tool complete and T1 date entered. Published tool times: six to eight weeks (Extreme Molding); 7 weeks or less (Meridian Products); 4 to 6 weeks from PO to T1 (Plastimold Products); 4 to 26 weeks (Pioneer Plastics); a minimum of three months (Precision Molded Plastics); 2 to 4 weeks for fast-turn tools, 6 weeks or more for production tooling (Wunder-Mold).

  6. 6

    Production deal, stage 3: T1 samples

    Exit: samples and dimensional report shipped to the customer. Published sampling times: typically 2 to 4 weeks (Wunder-Mold); mold qualification about a week or two (Precision Molded Plastics).

  7. 7

    Production deal, stage 4: Customer approval (FAI or PPAP)

    Exit: written approval attached and approval date entered.

  8. 8

    Production deal, stage 5: Production order received (closed won)

    Exit: first production PO or release entered and SOP date set. Wunder-Mold puts design to first production at about 8 to 16 weeks.

Our recommended stages for tracking a molding program as two linked deals. The tooling deal's amount is the tool price; the production deal's amount is EAU times piece price. Durations are from the molders' own process pages, read Nov. 4, 2026. Source: Plant to Pipeline recommendation; durations from Extreme Molding, Meridian Products, Plastimold Products, Pioneer Plastics, Precision Molded Plastics and Wunder-Mold process pages, read Nov. 4, 2026.

Fig. 02What nine US molders' process pages name between quote and production
MolderSteps namedSample or approval stepPO namedDurations published
Extreme Molding10Own step: 7. First Article ApprovalNoYes
Midstate Mold & Engineering5Inside Phase Four (tool and part validation)Own stage: Phase Three, before tool build; one PO appears to cover tool and partsNo
AIM Processing5Own step: Final Product Evaluation; T1 samples in Tool BuildIn text: PO for the toolingNo
Meridian Products4Own step: ReviewNoYes
Wunder-Mold4Own step: Stage 3, Tool trials and sampling (T1, T2)NoYes
Plastimold Products7Own steps: 4, T1 Samples; 5, First Article Inspection and Mold QualificationIn text: tool time measured from PO to T1Yes
Pioneer Plastics3Not in its steps (FAQ only)NoYes
Precision Molded Plastics10Own steps: Mold Qualification; Process ValidationOwn stage: Order Processing, a production order after mold approvalYes
Hansen Plastics9Own phases: sampling; approvalNoNo

Eight of nine pages list a sample, first article or approval step between tool build and production in their process steps, and seven give it its own step. Steps counted as each page lists them; Meridian counted on its four-step tooling workflow, Hansen on its list of timeline phases; AIM's own step is Final Product Evaluation, in which products are "evaluated for release." Pages read Nov. 4, 2026. Source: Our analysis of nine US injection molders' published process pages, read Nov. 4, 2026.

How long do molders say each stage takes?

Six of the nine pages publish durations, and all six give one for the tool. Their tool times run from Wunder-Mold’s 2 to 4 weeks for fast-turn tools up to the top of Pioneer’s range, “anywhere from 4 to 26 weeks,” and Fig. 01 lists each page’s figure under tool build.

Two pages put a number on sampling. Wunder-Mold tells customers to “Plan for typically 2 to 4 weeks” for trials and sampling, and Precision Molded Plastics says mold qualification “often takes about a week or two” and process validation, which produces the first article samples, “at least a week.” Only Wunder-Mold gives an end-to-end figure: “Most molding programs take about 8 to 16 weeks from design to first production.”

These are marketing pages and nine is a small set, but they give a sales manager a starting range for tool build and sampling, which a CRM needs before it can flag a stalled program. Our look at whether molders should publish prices covers the same kind of page for cost.

What CRM pipeline stages should an injection molder use?

Use two pipelines, or one pipeline with a deal type field, and link each production deal to the tooling deal that started it. The tooling deal opens with the request for quote (RFQ), closes won on the tooling PO, and carries the tool price as its amount. Midstate’s page says its quote covers “the cost of creating a tool and producing the parts,” and Plastimold’s quote is an “itemized quote (tooling and piece price),” so one quote can carry both prices. Store the tool price on the tooling deal when the quote goes out, and copy the piece price to the production deal when the tooling PO creates it.

The tooling PO creates the production deal. Its amount is estimated annual usage (EAU) times piece price, and its close date is the expected date of the first production PO. It moves through tool design approval, tool build, T1 samples and customer approval. Customer approval means whatever the buyer requires before it will order parts. That may be a first article inspection (FAI), which Plastimold describes as confirming “the part matches the print before production,” or, for automotive and other buyers that require it, the Production Part Approval Process (PPAP), which the Automotive Industry Action Group (AIAG), on its PPAP manual page, calls the industry standard for part approval “to ensure engineering design record and specification requirements are consistently met.” PPAP appears on one page in the set, Plastimold’s, which says “New tools are qualified per PPAP, ISIR, IQ/OQ/PQ or AS9102, depending on the customer and industry.” Its step 5 list adds “AS9102 FAI for aerospace and defense programs,” “IQ/OQ/PQ for medical device programs” and “PPAP and ISIR qualification when required.”

Our CRM for manufacturing guide suggests carrying tooling and piece price as two line items on the quote. Keep those line items, and add a second deal so the production revenue has its own stage and close date. A program that stalls at sampling then stays an open deal whose close date can slip.

How should the forecast count a molding program?

Report tooling and production revenue separately. Book the tool when its PO arrives, and keep the production revenue in the forecast until the first production order closes the deal. We would count a production deal in the committed forecast only after the deal exits the customer approval stage, and move its close date every time the T1 or approval date slips. Set stage probabilities from your own programs of the last two years, because no page in the set publishes approval rates.

Add one report: production deals that have sat in T1 samples or customer approval for more than 30 days. The 30-day threshold is our choice for both stages. It sits just past the 2 to 4 weeks Wunder-Mold tells customers to plan for sampling, and no page in the set gives a time for customer approval. The report then lists the programs the account’s salesperson and the program manager should raise with the buyer’s quality engineer.

What to set up Monday

  1. Create the tooling deal stages, each with its exit criterion:
    • RFQ in review: exits when the 3D file, drawing, EAU, resin and tooling need (new mold or transfer) are logged. Our RFQ playbook covers what to do in the first hour after an RFQ arrives.
    • Quote sent: exits when the itemized quote, with tool price and piece price at the stated EAU, is attached and dated.
    • Tooling PO received (closed won): the PO number, amount and payment terms are entered, and the PO has been reviewed against the quote. Entering this stage creates the production deal.
    • Closed lost: a required reason field (price, lead time, no award, program cancelled).
  2. Create the production deal stages:
    • Tool design approval: exits when the customer signs off on DFM (design for manufacturability) changes and the tool design.
    • Tool build: exits when the tool is complete and a T1 date is entered.
    • T1 samples: exits when samples and the dimensional report have shipped to the customer. Record T2 and later rounds in a sample round count field, in the same stage.
    • Customer approval (FAI or PPAP): exits when the customer’s written approval is attached and the approval date is entered.
    • Production order received (closed won): the first production PO or blanket order release is entered, with the start of production (SOP) date.
    • Closed lost: a required reason field (failed approval, program cancelled, moved to another molder).
  3. Add the fields that link the two deals, on both records: program ID, part number and revision, linked deal, tool number, tool price, tool ownership, piece price, EAU, program life in years, approval type (FAI, PPAP, other or none), planned and actual T1 date, approval date and SOP date.
  4. If your tooling terms tie a payment to approval, as Extreme Molding’s do, add a tooling balance due field to the tooling deal and have it read the approval date from the production deal.
  5. Build the 30-day aging report on T1 samples and customer approval, and review it in the weekly sales meeting. For the accounts those programs belong to, our piece on growing the OEM accounts you have covers what to ask for next.

Sources

  1. Extreme Molding, Our Process (Menands, NY)
  2. Midstate Mold & Engineering, Our Process (Franklin, MA)
  3. AIM Processing, "Plastic Injection Molding: Step by Step at AIM Processing," posted Sept. 27, 2022 (Longmont, CO)
  4. Meridian Products, Tooling and Prototyping (Dallas, TX)
  5. Wunder-Mold, "The 'Design-to-Part' Timeline: What to Expect" (Vacaville, CA)
  6. Plastimold Products, "Our Custom Injection Molding Process: From Quote to Production" (Delray Beach, FL)
  7. Pioneer Plastics, Custom Injection Molding (Dixon, KY)
  8. Precision Molded Plastics, "What to Expect Regarding Lead Times Associated with Plastic Injection Molding," Feb. 7, 2023 (Upland, CA)
  9. Hansen Plastics, "Injection Molding Lead Time and What Actually Controls the Schedule," Aug. 26, 2026 (Elgin, IL)
  10. AIAG, PPAP-4, Production Part Approval Process manual page
  11. RJC Mold, Injection Molding Production Process (excluded from our set: Shenzhen factory; US sales office)
  12. Plant to Pipeline, CRM for manufacturing

See an error? Email editor@planttopipeline.com with what is wrong. We fix errors and log them on the corrections page.

Filed under

Filed under

The Tuesday issue

One idea, one number and one example from a company like yours. Every Tuesday, under five minutes.

We use your email to send our newsletter and marketing emails. Unsubscribe anytime. Read our privacy policy.