Sales and marketing news, data and thoughts for people who make things.

The Number · Hiring and Employer Brand

Manufacturers had 1.87 job openings for every hire in September 2026

We pulled the Bureau of Labor Statistics job openings and hires series for manufacturing from January 2018 to September 2026. Manufacturers reported 584,000 open jobs in September 2026 and hired 313,000 people, or 1.87 openings for every hire. In 2019 the monthly ratio averaged 1.29.

Two assemblers in safety glasses and earplugs at a worn plant workbench: a younger woman tightens a cover bolt on a gray cast iron pump casing with a torque wrench while an older, gray-bearded man leans on the bench beside her and watches.
A new assembler tightening a cover bolt on a pump casing while a senior coworker watches.

Manufacturers had 584,000 job openings on the last business day of September 2026 and hired 313,000 people during the month, according to the Bureau of Labor Statistics (BLS) Job Openings and Labor Turnover Survey (JOLTS) release for September, published Nov. 3, 2026 (openings, Table 1; hires, Table 2). That is 1.87 openings for every hire, against a 2019 monthly average of 1.29. Manufacturing job openings were 50.1 percent higher than in September 2025, while manufacturing hires were 4.3 percent higher.

The manufacturing quits rate was 1.6 percent and the layoffs and discharges rate 0.8 percent, close to their September 2025 rates of 1.4 and 0.9 percent, so our reading is that manufacturers are falling short on reaching applicants and turning them into hires. For a machinist or maintenance posting that has been open since summer, a marketing team of one to three people can work on both through the careers page, the job post itself and local recruiting channels.

How many manufacturing job openings were there in September 2026?

The 584,000 openings in BLS Table 1 are the most for manufacturing since December 2023, when the count was 597,000. The manufacturing openings rate was 4.4 percent, up from 3.0 percent in September 2025. Across all industries the release counted 7,523,000 openings and 5,402,000 hires, or 1.39 openings per hire, compared with 1.87 in manufacturing.

Manufacturing hires averaged 305,100 a month from January to September 2026, against 338,400 a month in 2019, while manufacturing openings averaged 511,900 a month over those nine months of 2026 and 436,500 a month in 2019. Under the JOLTS technical note, a job counts toward the 584,000 only if the employer “is actively recruiting workers from outside the establishment.”

From January 2018 to August 2026, 12 months had an openings-per-hire ratio at or above September 2026’s: April, May, June, July, September and October 2021; January, April, July, September and November 2022; and July 2026, at 1.97. Before 2026, the most recent month at that level was November 2022.

Fig. 01Manufacturing job openings per hire, January 2018 to September 2026
Manufacturing job openings per hire, January 2018 to September 2026
Openings per hire
2018-011.22
2018-021.19
2018-031.16
2018-041.22
2018-051.24
2018-061.25
2018-071.2
2018-081.36
2018-091.44
2018-101.26
2018-111.42
2018-121.35
2019-011.22
2019-021.36
2019-031.27
2019-041.29
2019-051.39
2019-061.44
2019-071.37
2019-081.31
2019-091.29
2019-101.29
2019-111.15
2019-121.12
2020-011.28
2020-021.11
2020-030.95
2020-040.83
2020-050.5
2020-060.71
2020-071.13
2020-081.15
2020-091.22
2020-101.32
2020-111.18
2020-121.12
2021-011.47
2021-021.49
2021-031.67
2021-042.25
2021-052.16
2021-061.99
2021-071.89
2021-081.77
2021-091.88
2021-101.92
2021-111.7
2021-121.79
2022-011.89
2022-021.67
2022-031.74
2022-042.07
2022-051.78
2022-061.78
2022-072.02
2022-081.72
2022-092.08
2022-101.69
2022-111.9
2022-121.82
2023-011.7
2023-021.52
2023-031.74
2023-041.76
2023-051.27
2023-061.44
2023-071.3
2023-081.48
2023-091.61
2023-101.54
2023-111.5
2023-121.66
2024-011.49
2024-021.74
2024-031.63
2024-041.34
2024-051.55
2024-061.42
2024-071.41
2024-081.5
2024-091.35
2024-101.39
2024-111.38
2024-121.34
2025-011.42
2025-021.29
2025-031.26
2025-041.19
2025-051.45
2025-061.36
2025-071.45
2025-081.39
2025-091.3
2025-101.38
2025-111.4
2025-121.51
2026-011.76
2026-021.57
2026-031.48
2026-041.72
2026-051.75
2026-061.5
2026-071.97
2026-081.53
2026-091.87

Monthly manufacturing job openings divided by monthly manufacturing hires, both seasonally adjusted. The 2019 average was 1.29. BLS does not publish this ratio; we calculated it. Openings are counted on the last business day of the month and hires over the whole month. August 2026 is revised and September 2026 is preliminary. Source: Our analysis of BLS JOLTS data: FRED series JTS3000JOL and JTS3000HIL (as of Sept. 29, 2026) for January 2018 to July 2026, and the BLS JOLTS release of Nov. 3, 2026 (Tables 1 and 2) for August and September 2026.

Which manufacturers have the widest gap between openings and hires?

Durable goods manufacturers reported 403,000 openings in September 2026, an openings rate of 4.9 percent, and 174,000 hires, which is 2.32 openings per hire. Nondurable goods manufacturers reported 180,000 openings, a rate of 3.7 percent, and 139,000 hires, or 1.29 openings per hire. Durable goods openings were 248,000 in September 2025, which means durable goods makers account for 155,000 of the 195,000 rise in manufacturing openings over the year.

Fig. 02Job openings and hires by industry group, September 2026
GroupOpenings (thousands)Openings rateHires (thousands)Openings per hire
Manufacturing5844.4%3131.87
Durable goods4034.9%1742.32
Nondurable goods1803.7%1391.29
Wholesale trade2253.6%1691.33
All industries7,5234.5%5,4021.39

Seasonally adjusted; September 2026 figures are preliminary. Openings per hire is our calculation from the BLS levels. Durable and nondurable goods openings add to 583,000 against the published manufacturing total of 584,000 because of rounding. Source: Our analysis of the BLS JOLTS release of Nov. 3, 2026, Tables 1 and 2.

For distributors, wholesale trade openings rose to 225,000 in September 2026 from 161,000 a year earlier, and the openings rate to 3.6 percent from 2.6 percent. With 169,000 wholesale hires, the sector had 1.33 openings per hire, up from 1.07 in September 2025.

Are manufacturing workers quitting more?

Manufacturing quits rose to 199,000 in September 2026 from 177,000 a year earlier, according to BLS Table 4, lifting the quits rate to 1.6 percent from 1.4 percent. Layoffs and discharges were 99,000, and their rate slipped to 0.8 percent from 0.9 percent a year earlier (Table 5). From September 2025 to September 2026, manufacturing quits rose by 22,000 while manufacturing openings rose by 195,000. JOLTS does not report why an opening goes unfilled, and the tables used here do not split manufacturing by plant size or occupation.

How did we calculate openings per hire?

We built the monthly ratio from the seasonally adjusted manufacturing series on FRED, the Federal Reserve Bank of St. Louis data service (openings, JTS3000JOL, and hires, JTS3000HIL, both last updated Sept. 29, 2026), and replaced August and September 2026 with the Nov. 3 release figures. The release revised August manufacturing openings to 530,000 from 522,000 and hires to 347,000 from 332,000, and the September figures are preliminary. BLS does not publish openings per hire, and the ratio’s two inputs cover different spans, with openings counted on one day and hires over the whole month. The 2019 average of 1.29 is the mean of that year’s 12 monthly ratios; dividing all 2019 openings by all 2019 hires also gives 1.29.

What does the hiring gap mean for the sales and marketing team?

In our view, customers are most likely to feel the hiring gap in lead times. The Institute for Supply Management (ISM) October 2026 manufacturing report put its employment index at 52.4 percent, growing for a fourth month, and its backlog of orders index at 54.6 percent, growing for a 10th month at a slower rate than in September. A plant carrying open production jobs and a growing backlog has less room on its schedule. Check quoted lead times with operations before the sales team repeats last quarter’s numbers to customers. The industries that reported growth are in our ISM industry ranks for October.

JOLTS has no occupation detail, so it cannot show how hard inside sales, estimating or marketing roles at manufacturers are to fill. Postings for those roles run on the same careers page and job boards as your production postings, and the changes below apply to them as well. If the opening is on your own team, our guide to marketing team structure for teams of one to three compares the pay ranges in eight marketing coordinator and specialist postings with the BLS manufacturing median for marketing specialists.

What should the careers page and job posts change before spring?

Put the pay range and the shift in the first lines of every production post. To check your range against your area before the post goes up, use our machinist job description guide, which gives May 2025 BLS machinist pay for the 12 states and 20 metros with the most machinists and compares eight live postings. Durable goods plants have the most reason to rewrite their production posts before spring hiring starts, with 2.32 openings per hire in September compared with 1.29 at nondurable goods makers.

Show the actual work on the careers page: photographs of your own floor, the machines a new hire will run, the training path for the first 90 days and how to apply from a phone. Of the eight manufacturer careers pages scored in our careers page guide, one stated pay; the guide also lays out a Manufacturing Day 2027 plan that starts in the spring.

Ask human resources where every hire since July 2026 came from, by channel, and move spend away from the channels that produced no hires.

Set a reminder for Dec. 1, 2026, at 10 a.m. Eastern time, when BLS publishes JOLTS for October 2026, and check whether manufacturing’s openings per hire moved back toward the 2019 average of 1.29 or stayed near 1.87.

Sources

  1. US Bureau of Labor Statistics, Job Openings and Labor Turnover, September 2026 (news release), Nov. 3, 2026
  2. BLS JOLTS, Table 1, job openings levels and rates by industry and region, seasonally adjusted
  3. BLS JOLTS, Table 2, hires levels and rates by industry and region, seasonally adjusted
  4. BLS JOLTS, Table 4, quits levels and rates, seasonally adjusted
  5. BLS JOLTS, Table 5, layoffs and discharges levels and rates, seasonally adjusted
  6. BLS JOLTS Technical Note, definitions of job openings and hires and how rates are computed
  7. Federal Reserve Economic Data (FRED), Federal Reserve Bank of St. Louis, Job Openings: Manufacturing (JTS3000JOL), thousands, seasonally adjusted, last updated Sept. 29, 2026
  8. FRED, Hires: Manufacturing (JTS3000HIL), thousands, seasonally adjusted, last updated Sept. 29, 2026
  9. Institute for Supply Management, Manufacturing PMI at 55.5%; October 2026 ISM Manufacturing PMI Report, PR Newswire, Nov. 2, 2026
  10. Plant to Pipeline, ISM manufacturing index by industry, October 2026
  11. Plant to Pipeline, employer brand for manufacturers: the careers page and a Manufacturing Day 2027 plan
  12. Plant to Pipeline, machinist job description: pay by state and what to include
  13. Plant to Pipeline, marketing team structure for manufacturers: teams of 1 to 3

See an error? Email editor@planttopipeline.com with what is wrong. We fix errors and log them on the corrections page.

Filed under

Filed under

The Tuesday issue

One idea, one number and one example from a company like yours. Every Tuesday, under five minutes.

We use your email to send our newsletter and marketing emails. Unsubscribe anytime. Read our privacy policy.