Sales and marketing news, data and thoughts for people who make things.

Trade shows · Trade Shows and Events

Organizer says 92% of planned FABTECH 2027 space is already sold

Job shops and contract manufacturers were the largest company type at the last four FABTECH Chicago shows. If you sell to them, we would request space now.

In a fabrication shop, a press brake operator in safety glasses and earmuffs fits a steel square into the bend of a stainless bracket on a worktable while an older shop owner in safety glasses watches, with an idle press brake behind them.
A press brake operator checks the bend of a stainless bracket with a square while the shop owner watches. Job shops and contract manufacturers were 47% of attendees at FABTECH's 2025 Chicago show, according to the organizer's post-show report.

FABTECH’s organizer said in its Oct. 30, 2026 release on the Las Vegas show that 92% of the planned exhibit space for FABTECH 2027 is already sold. The show runs Sept. 13 to 16, 2027 at McCormick Place in Chicago, about 10 months out as of Nov. 7, 2026, and the exhibit page puts the 2027 rates and prospectus behind a request form.

If the people who buy or specify what you make are shop owners, engineers or job shops, we think you should ask for space now, whether you sell to them directly or through distributors. The organizer’s post-show reports for the last four Chicago editions (2019, 2021, 2023 and 2025) describe a similar mix of attendees each time. Owners and executives were 23% to 26% of attendees, engineers 18% to 20%, and job shops and contract manufacturers were the largest type of company in every year. Distributors were 2% to 3% of attendees by job function, so a brand that sells through distributors would mostly meet end users at its booth. Before signing, settle whether your distributors will help staff the booth or book their customers into meetings there.

FABTECH Chicago schedule and a regional alternative

  • The last three Chicago shows ran in September of odd years, in 2021, 2023 and 2025, after a November 2019 show, according to the organizer’s post-show reports.
  • MT Series East, the show long known as EASTEC, runs May 11 to 13, 2027 at the Eastern States Exposition in West Springfield, Mass., according to its show page.

What the organizer’s reports say about the Chicago audience

We compared the organizer’s reports on the 2019, 2021, 2023 and 2025 Chicago shows. Each says its audience figures come from that year’s “Audience Survey and Registration Data,” so they are the organizer’s own figures, self-reported by attendees, and none of the four cites an outside audit.

The reports give attendance of 48,278 in November 2019, 24,305 in September 2021, 40,505 in 2023 and 41,795 in 2025 (Fig. 01). The 2021 show was the first September edition and ran under pandemic conditions. Every named job function stayed within a three-point range across the four years. Owners, company management and corporate executives were 23% to 26% of attendees in all four years, sales and marketing staff 13% to 15%, and manufacturing and design engineers 18% to 20% (Fig. 01).

Attendees from companies with 50 to 499 employees were 40% in 2019, 42% in 2021, 44% in 2023 and 42% in 2025, by our sum of the organizer’s 50 to 99, 100 to 249 and 250 to 499 employee bands (Fig. 01). Job shops and contract manufacturers were the largest type of company in every year, with 39% in 2019, 35% in 2021, 42% in 2023 and 47% in 2025 (Fig. 01).

Between 80% and 83% of attendees said they influence or approve equipment purchases (Fig. 01). Budgets over $200,000 were reported by 44% in 2019 and 2021 and by 52% in 2023 and 2025 (Fig. 01). The 2021 report’s own budget bands add to 49%, while the report states 44% (Fig. 01).

Fig. 01FABTECH Chicago audience, 2019 to 2025, from the organizer's post-show reports
Figure2019202120232025
Attendance48,27824,30540,50541,795
Exhibitors1,7489211,5851,702
Owner, company management or corporate executive23%26%25%25%
Manufacturing or design engineering18%20%20%19%
Sales and marketing14%15%13%15%
Purchasing3%3%3%3%
Distributor (job function)3%2%3%3%
Companies with 50 to 499 employees (our sum of three bands)40%42%44%42%
Job shop or contract manufacturer (type of company)39%35%42%47%
Influence or approve equipment purchases80%82%83%81%
Equipment budgets over $200,00044%44%52%52%
First-time visitors54%45%52%50%
Attend no other trade shownot reportednot reported61%60%

Across four Chicago shows, owners and executives held at 23% to 26% of attendees and companies with 50 to 499 employees at 40% to 44%, while distributors stayed at 2% to 3% by job function. By type of company, dealers and distributors were 6% to 7% of attendees. Figures are the organizer's own audience survey and registration data, self-reported by attendees. The 50 to 499 row is our sum of the 50 to 99, 100 to 249 and 250 to 499 employee bands. The 2021 show was the first September edition and ran under pandemic conditions, and its budget bands add to 49% against the 44% the report states. Reports read Nov. 7, 2026. Source: FABTECH post-show reports for 2019, 2021, 2023 and 2025 (fabtechexpo.com)

Is it too late to exhibit at FABTECH 2027?

The organizer has said 92% of the planned space is sold and has not given the square footage or booth count for the remaining 8%. The 2027 floor plan is public, and the 2027 public exhibitor list was only partly filled in when we checked it on Nov. 7, 2026. A competitor named on the exhibitor list has booked space, but a missing name means little while the list is incomplete.

Our comparison of 2027 booth costs found FABTECH was one of five shows in that dataset that published no 2027 space rate on any page we could open in October 2026. Build the budget from the quote FABTECH’s exhibit sales staff send you, then enter it in the cost lines of our trade show ROI worksheet.

FABTECH’s exhibit page says 202,191 leads were collected at the 2025 Chicago show, an average of 119 per exhibitor. That is the organizer’s count of leads collected, and the page does not define a lead. Our worksheet calls cost per lead “easy to compute and nearly useless” and says “Badge scans do not count,” so measure the booth against your own count of qualified leads from past shows.

The organizer’s 2025 exhibitor survey scored the show lower than the 2023 survey did. In 2025, 66% of exhibitors said they were satisfied or very satisfied with the value received from exhibiting, 61% would recommend FABTECH to a colleague and 66% were satisfied or very satisfied with the quality of leads. The 2023 report gave 89%, 77% and 88% for the same three questions, and the 2025 report gives no reason for the change. Because of that drop in satisfaction with lead quality, we would book meetings before the show and count only qualified leads afterward, and we would ask the sales rep what the organizer changed after that survey.

Who should push for space, and who should plan meetings instead?

The Chicago audience fits suppliers whose buyers are shop owners and engineers. In 2025, owners and executives (25%) and engineers (19%) made up 44% of attendees. At 41,795 attendees, our calculation puts owners and executives at about 10,450 people and engineers at about 7,940, if the shares apply to the full attendance count. Job shops and contract manufacturers were 47% of 2025 attendees by type of company (Fig. 01), which matters most to suppliers of press brakes, lasers, saws, welding cells or shop software sold to those shops.

Distributors were 3% of 2025 attendees by job function (Fig. 01), about 1,250 people by our calculation. For a brand that sells through distributors, we would base the decision on whether the owners, engineers and job shops those distributors serve are on this floor in numbers, and on whether those distributors will co-staff the booth or bring their customers to it for booked meetings. If the distributors will not, the booth has to earn its cost from walk-up traffic. Our ROI worksheet says channel-led companies “should count distributor and rep meetings as their own line,” so track those meetings apart from end-user leads.

Sellers who mainly reach purchasing departments have a thinner audience. Purchasing was 3% of attendees in all four reports (Fig. 01), about 1,250 people in 2025 by our calculation. Because the report rounds to whole points, the true figure could be anywhere from about 1,040 to 1,460. We think a booth makes sense for those sellers only if the engineers and owners who specify the product are also targets.

Most attendees in the last two surveys said FABTECH is the only trade show they attend, 61% in 2023 and 60% in 2025 (Fig. 01), which is why we would plan to be in Chicago for the show even without a booth.

A meetings plan if you don’t get a booth

A meetings plan is a schedule of booked conversations with named people at the show. Start with the distributors and reps who already carry your line, since some may exhibit or bring customers to the show. Ask each one which of its accounts are going and whether you can join the meetings it has booked with them. Then book a meeting room or hotel suite near McCormick Place early, and send invitations once the room is confirmed.

IMTS does not run in 2027, as our piece on shows taking an off year covers, so a supplier that misses FABTECH has fewer national metalworking shows to choose from that year. Our list of 123 manufacturing trade shows for 2027 has the regional options by industry.

For a Northeast supplier selling to small job shops, MT Series East is the regional show to price against a FABTECH booth that may not be available. The MT Series site posts no sold-space figure for it.

In your industry

In the 2025 report, 34% of attendees listed automation and 33% listed robotics among their technology interests, sixth and seventh in a question that allowed more than one answer. The five ahead of them were cutting, lasers, bending and forming, welding machines, and arc welding. The 2026 Las Vegas show added an Artificial Intelligence for Manufacturing (AIM) pavilion alongside its Automation pavilion, according to the organizer’s Oct. 30 release, and the space request form on the exhibit page lists both automation and artificial intelligence as technology categories.

For finishing suppliers, 22% of 2025 attendees listed finishing, paint and powder coating as an interest and 12% listed finishing and plating. Welding consumables drew 16% in 2025, down from 22% in the 2023 report.

What should you do in November 2026?

  1. Request the 2027 prospectus and rates through the exhibit sales form on fabtechexpo.com/exhibit. When the sales team follows up, ask how much space is left, in which booth sizes, and whether there is a 2027 waitlist.
  2. Put the 2027 quote into the ROI worksheet next to your own qualified-lead count and close rate from past shows.
  3. If you sell through distributors, ask your main ones whether they will co-staff a booth or book customers into meetings in Chicago, and get the answer before you sign.
  4. If no open booth fits the budget, start the meetings plan as soon as FABTECH’s quote arrives. Where the sales rep confirmed a waitlist, ask to join it.
  5. List the 20 to 40 accounts and partners you most want to see in Chicago, and send each one a meeting request by June 2027.
  6. If you sell in the Northeast, compare the FABTECH quote with MT Series East’s published 2027 rates. SME’s MT Series exhibitor packages page lists a standard rate of $42 per square foot for booths of 100 to 200 square feet and $40 for 201 to 500 square feet, with a decorator package included at the smaller size and unlimited material handling at the larger one.

Sources

  1. FABTECH 2019 Post Show Report (Chicago, Nov. 11 to 14, 2019)
  2. FABTECH 2021 Post Show Report (Chicago, Sept. 13 to 16, 2021)
  3. FABTECH 2023 Post Event Report (Chicago, Sept. 11 to 14, 2023)
  4. FABTECH 2025 Post Event Report (Chicago, Sept. 8 to 11, 2025)
  5. FABTECH, "FABTECH 2026 Breaks Non-Chicago Attendance Record in Historic Las Vegas Return," Oct. 30, 2026
  6. FABTECH, Exhibit page
  7. FABTECH 2027 floor plan
  8. FABTECH 2027 public exhibitor list
  9. SME, MT Series home page
  10. SME, MT Series exhibitor packages and 2027 space rates
  11. SME, MT Series East show page
  12. Plant to Pipeline, trade show ROI worksheet
  13. Plant to Pipeline, trade show booth cost in 2027
  14. Plant to Pipeline, IMTS 2027 and the shows taking an off year
  15. Plant to Pipeline, manufacturing trade shows 2027

See an error? Email editor@planttopipeline.com with what is wrong. We fix errors and log them on the corrections page.

Filed under

Filed under

The Tuesday issue

One idea, one number and one example from a company like yours. Every Tuesday, under five minutes.

We use your email to send our newsletter and marketing emails. Unsubscribe anytime. Read our privacy policy.