Sales and marketing news, data and thoughts for people who make things.

Industry edition · Sales Process and Enablement

CMMC Level 2 after the Phase 2 suspension: what suppliers should tell buyers and put on their sites

We read the CMMC rule, the July 13, 2026 suspension notices and the supplier cybersecurity pages of seven primes. Only RTX's page mentions the suspension, and the rule's own status names give a supplier more accurate wording than "certified" or "compliant."

A closed gray steel network cabinet mounted on a painted concrete block wall, with a bundle of cables dropping into it from a wall tray, a workbench with a toolbox at left and an enclosed machining center at right.
A closed network cabinet on the block wall of a machine shop, fed by a cable drop, with a machining center beside it.

If a prime’s RFQ asks for your CMMC Level 2 status, the highest status a new DoD contract can require while the suspension holds is Level 2 (Self), a self-assessment. The CMMC rule set Nov. 10, 2026 as the start of Phase 2, which makes a third-party Level 2 assessment a condition of award, and the Department of War suspended that phase on July 13, 2026. During the suspension, contracting officers “may only include CMMC Level 1 (Self) or Level 2 (Self) assessment requirements,” according to Morgan Lewis’s July 16, 2026 alert, a secondary summary of the department’s memos, which we could not open. The same alert notes that DFARS 252.204-7012 and the 110 NIST SP 800-171 requirements behind it still apply.

This piece is for the commercial side of a shop that makes parts for defense programs: whoever fills in the prime’s portal questionnaire, writes the capabilities statement and owns the website. Our position is that you should state your status in the rule’s own terms, with the date you affirmed it in SPRS, and drop “CMMC certified” or “CMMC compliant” unless a C3PAO assessment stands behind the words. As of Nov. 5, 2026, no replacement Phase 2 date had been published, so Nov. 10, 2026 does not by itself bring third-party assessments into new contracts. This article is not legal advice; the clauses in your own contracts govern.

What did the CMMC rule set for Nov. 10, 2026, and what changed?

32 CFR 170.3(e) phases the program in over four years. Phase 1 began when the DFARS rule took effect, and Phase 2 “Begins one calendar year following the start date of Phase 1,” when DoD intends to add Level 2 (C3PAO) as a condition of award in applicable solicitations. The DFARS rule, Federal Register document 2025-17359, took effect Nov. 10, 2025, which put Phase 2 at Nov. 10, 2026.

The Small Business Administration’s July 13, 2026 statement confirms the suspension of Phase II, “originally scheduled to go into effect on November 10, 2026,” and says SBA analysis estimates total compliance costs “can reach approximately $593,800 per CMMC certification” for small firms that need a third-party assessment. Federal News Network reported on Oct. 26, 2026 (secondary) that responses to the department’s July request for information gave an average cost of $47,000 to comply with CMMC, excluding NIST SP 800-171 work. The SBA number is a total per certification and the RFI average leaves out the NIST work, so the two figures measure different costs. WilmerHale’s July 20, 2026 alert (secondary) adds that contracting officers will strip Phase 2 requirements from existing contracts by modification before the next option period or at the next administrative modification, and that a CMMC Reform Task Force had 60 days to report.

The RFI closed Aug. 14, according to NCMBC’s white paper, and the task force’s 60 days ran out on Sept. 11, 2026. A Sept. 3 class deviation memo directed contracting officers to strip third-party assessment requirements from contracts, Washington Technology reported on Sept. 9 (secondary). As of Nov. 5, 2026, no task force report had been published. In secondary reporting on Oct. 27, 2026, Federal News Network said it had obtained the task force’s summary of the RFI responses, which says DoD could restart Phase 2 “with a narrower population” over a 90-day period; DoD declined to comment. At the October Cyber AB town hall, Cyber AB chief executive Matt Travis said he had heard secondhand that an announcement in November was reasonable to expect, according to a recap on CMMC.com, a site run by the compliance software company Secureframe (secondary; Travis stressed it was not firsthand information). Our search of the Federal Register’s database on Nov. 5 found no CMMC rule published since July 1, 2026.

Fig. 01CMMC Phase 2: the rule's date and what happened instead
  1. Dec. 16, 2024

    CMMC program rule (32 CFR 170) takes effect

  2. Nov. 10, 2025

    DFARS rule takes effect; Phase 1 begins

    Level 1 (Self) and Level 2 (Self) in applicable contracts

  3. July 13, 2026

    Phase 2 suspended; 60-day task force review

    New contracts limited to Level 1 (Self) or Level 2 (Self)

  4. Aug. 14, 2026

    Reform RFI closes

    Secondary: NCMBC

  5. Sept. 3, 2026

    Class deviation carries the pause into contract text

    Secondary: Washington Technology

  6. Oct. 27, 2026

    Press report on the task force's unpublished options

    Secondary: Federal News Network; DoD declined comment

  7. Nov. 10, 2026

    Original Phase 2 start; no replacement date published as of Nov. 5

Source: eCFR 32 CFR 170.3; Federal Register 2024-22905 and 2025-17359; SBA, July 13, 2026; Morgan Lewis; NCMBC; Washington Technology; Federal News Network; read Nov. 5, 2026.

What does CMMC Level 2 require of a supplier right now?

The flowdown rule is unchanged. 32 CFR 170.23 applies CMMC “at all tiers” that process, store or transmit FCI or CUI. A subcontractor handling CUI needs Level 2 (Self) at minimum, and Level 2 (C3PAO) when the prime contract requires it.

DFARS 252.204-7021 names seven possible statuses, from Final Level 1 (Self) to Final Level 3 (DIBCAC). A Final Level 2 status stays current for three years with an affirmation of continuous compliance no older than one year; a Conditional status lasts 180 days. Each assessment gets a 10-character CMMC UID in SPRS, and before award the prime must make sure a subcontractor’s status is current at the level being flowed down. A subcontract signed with a C3PAO requirement keeps it until it is modified, so read the clause in the contract you hold.

Inaccurate cybersecurity representations carry False Claims Act risk. On Sept. 1, 2026 the Justice Department announced that Honeywell Aerospace agreed to pay $2,042,518 to resolve allegations that, from April 2020 through December 2023, a Honeywell business unit submitted false claims for payment while failing to meet NIST SP 800-171 on one of its networks, years before any CMMC phase began. The release says the claims are allegations only and there has been no determination of liability.

What do primes’ supplier pages say about CMMC?

We read the supplier cybersecurity pages of seven primes on Nov. 5, 2026, and only RTX’s mentions the July 13 suspension.

Fig. 02What seven primes' supplier pages say about CMMC
PrimeMentions the July 13 suspensionWhat the page says
RTXYesPhase I Level 1 (Self) and Level 2 (Self) requirements "remain in place"
Lockheed MartinNoActive suppliers submit CMMC status through an attestation in Exostar
BoeingNoESLC portal is where suppliers "submit progress and evidence of their CMMC level"
GE AerospaceNo"Achieving CMMC certification is mandatory"
General Dynamics Land SystemsNoCUI handlers "must be certified at least at CMMC level 2" by third parties
Northrop GrummanNoSupplier form offers CMMC Level 1 through Level 5
L3HarrisNoNames DFARS 7012, 7019 and 7020 and its Exostar questionnaire; no CMMC mention

Northrop's form still lists five levels; the rule defines three. Source: Our read of each prime's supplier cybersecurity page or form, Nov. 5, 2026.

RTX’s page adds that the suspension does not alter contractual cybersecurity requirements, including NIST SP 800-171 Revision 2 and DFARS 252.204-7012, “unless formally directed otherwise through an authorized contract amendment or modification.” The pages of GE Aerospace and General Dynamics Land Systems read stricter than anything a new DoD contract can carry during the suspension, since both present certification as a requirement and GDLS ties it to accredited third parties. Three primes take supplier answers through portals, with Lockheed Martin and L3Harris on Exostar and Boeing on ESLC, and Lockheed describes supplier cyber risk as “an integral part of the buying decision.” Northrop Grumman’s Supplier Information Form is out of date, offering Levels 1 through 5 from the retired five-level model.

When you fill in a prime’s portal questionnaire, answer in the rule’s terms and ask the buyer which level and assessment type the subcontract will carry.

How should a supplier word CMMC Level 2 status on its website and RFQs?

In our read of AS9100 machine shop websites for this section, four state a cybersecurity posture, and none uses a status the rule defines. Focused on Machining and Protomatic’s certifications page both name CMMC, the first as “CMMC level 2 compliant security” and the second in the line that the company “is compliant to DFARS, NIST SP800-171, CMMC.” The other two cite NIST 800-171 alone, with “NIST 800-171 COMPLIANT (+110)” on the Baron Machine homepage and “We adhere to NIST-800 171 cyber security requirements” on the About page of United Gear & Machine. A line on a website is not evidence of what any of these shops has or has not done, and we did not check their SPRS entries or contracts. None of the four lines says which assessment type stands behind it, a detail that each status name in DFARS 252.204-7021 carries.

Fig. 03Rule-defined CMMC status wording and the website phrases it replaces
Say this (when it is true)Instead of
Final Level 2 (Self) CMMC status; affirmed in SPRS [month, year]CMMC certified
NIST SP 800-171 self-assessment posted in SPRS [date]; system security plan currentNIST 800-171 compliant (+110)
Final Level 2 (C3PAO) CMMC status, [date]; certificate on requestCMMC Level 2 compliant (without an assessment type)
Final Level 1 (Self) CMMC status; affirmed [date] (FCI only)CMMC ready
Preparing for a Level 2 (C3PAO) assessmentCMMC 2.0 certified

Status names from DFARS 252.204-7021; the last row is plain wording for a shop with no assessment yet. Keep the SPRS score itself for the portal or the buyer who asks. Source: DFARS 252.204-7021 via eCFR; wording read on four shop sites, Nov. 5, 2026.

The same line belongs on the capabilities statement. Our capabilities statement guide notes that defense buyers screen on CAGE code, ITAR registration and CMMC status.

What to do before the next RFQ

  1. Pull the CMMC clause from every open contract and subcontract and record the level and assessment type each one names. A C3PAO requirement already in a subcontract stays until the prime modifies it.
  2. Check the date of your last SPRS affirmation. Under 252.204-7021 it must be no older than one year.
  3. Update the Exostar questionnaire, Boeing’s ESLC record and any other portal in the same words you will use on the site.
  4. Replace “certified” or “compliant” on the website and capabilities statement with your status, assessment type and date.
  5. Give sales one sentence to use when a buyer asks, plus one question back: which CMMC level will the subcontract carry? Our RFQ playbook covers routing quotes that arrive with controlled drawings to a secure portal, and our read of OEM AI terms covers what those drawings rule out for AI tools.
  6. Until DoD publishes the task force decision, keep your SPRS self-assessment entry and affirmation date, your current system security plan and the clause list from step 1 in one folder, ready to send to a prime if Phase 2 restarts for a narrower population.

Sources

  1. eCFR: 32 CFR 170.3, Applicability
  2. eCFR: 32 CFR 170.23, Application to subcontractors
  3. eCFR: 48 CFR 252.204-7021
  4. Federal Register: CMMC Program final rule, 2024-22905 (Oct. 15, 2024; effective Dec. 16, 2024)
  5. Federal Register: DFARS Case 2019-D041, 2025-17359 (Sept. 10, 2025; effective Nov. 10, 2025)
  6. SBA: SBA Commends U.S. Department of War's Suspension of CMMC Phase II (July 13, 2026)
  7. Morgan Lewis: Department of War Suspends CMMC Phase II Requirements (July 16, 2026)
  8. WilmerHale: Pentagon Suspends CMMC Phase 2 Requirements (July 20, 2026)
  9. NCMBC: CMMC Updates, white paper current as of July 29, 2026
  10. Washington Technology: CMMC's Phase 2 suspension locked in with binding regulation (Sept. 9, 2026)
  11. Federal News Network: DoD's reasons for CMMC pause falling apart in face of RFI responses (Oct. 26, 2026)
  12. Federal News Network: RFI offers path forward for DoD with CMMC (Oct. 27, 2026)
  13. CMMC.com (run by Secureframe): October 2026 Cyber AB Town Hall Recap (Oct. 28, 2026)
  14. The Cyber AB: Professional Staff
  15. DOJ: Honeywell Aerospace Inc. Agrees to Pay Over $2M (Sept. 1, 2026)
  16. RTX: Supplier cybersecurity
  17. Lockheed Martin: Supplier cybersecurity
  18. Boeing Suppliers: Cybersecurity
  19. GE Aerospace: US Government / US DoW cyber security requirements
  20. General Dynamics Land Systems: Supplier cybersecurity
  21. Northrop Grumman: Supplier Information Form
  22. L3Harris: Supplier cybersecurity
  23. Focused on Machining: homepage
  24. Protomatic: Certifications
  25. Baron Machine: homepage
  26. United Gear & Machine: About
  27. Federal Register: search for documents mentioning CMMC published on or after July 1, 2026 (two Unified Agenda notices, Aug. 14, 2026; no rules)

See an error? Email editor@planttopipeline.com with what is wrong. We fix errors and log them on the corrections page.

Filed under

Filed under

The Tuesday issue

One idea, one number and one example from a company like yours. Every Tuesday, under five minutes.

We use your email to send our newsletter and marketing emails. Unsubscribe anytime. Read our privacy policy.